Total Power Solutions
Our catalogues

Our catalogues

German    English    French
Cordex™ 24V 400W

Cordex™ 24V 400W

Modular Switched Mode Rectifier

Cordex™ 24V 400W
Data sheet
Downloads
Source of supply

Cordex rectifiers bring advanced technology to the DC power industry. Innovative engineering combines the best in efficiency and reliability meeting the power requirements for a variety of system applications.

The Cordex 400W rectifier is available in a choice of 19" or 23" shelf configurations. Both system options come complete with distribution, controller, and capacity for four rectifiers. With 1.6kW total output per shelf, it is an ideal solution to meet the needs of applications requiring lower power.

Local and remote setup, adjustment, and control is a simple single-step process with the Cordex CXC System Controller. By utilizing TCP/IP technology, complete configuration and monitoring of power equipment is possible through a network web browser.

  • Available in 14A @ 24VDC
  • Universal 120/208 to 240VAC input
  • High efficiency and power factor correction
  • Convection cooled
  • Hot swappable, 2RU ultra compact design

Variants Technical data Supplies   


Rectifier Module(s)


Electrical

 
Input voltage: 90 to 320VAC
Power output: 400W
Input frequency: 45 to 70Hz
Power factor:  >99%
THD: <5%
Efficiency: >90%
Output voltage: 20 to 29VDC
Output current: 14A @ 27VDC (14A max.)
Load regulation: <±0,5% (static)
Line regulation: <±0,1% (static)
Transient Repsonse: ±2%for 50 to 100% load step,2ms recovery time
Wide band noise <30mVrms
<150mVp-p
Psophometric noise: <1mV

Mechanical
Dimensions
 
mm: 88,4H x 71,6W x 242D
inches: 3,4H x 2,8W x 9,5D
Weight: 1,4kg (3lb)

Features
 
Inidcators:
 
AC mains OK ---green LED
Module alarm ---red LED
Cooling: Natural convection
Adjustments:
(via CXCI Controller)




 
Float and equalize voltage
Battery test voltage
High and low voltage alarms
High voltage shutdown
Surrent limit
Start delay time
Slope %
Protection:





 
Current limit/short circuit
Input/output high voltage shutdown
Output power limiting
Thermal foldback/shutdown
Input transient
AC low line foldback/shutdown
AC high voltage shutdown
Environmental
Temperature Operation: -40 to 50°C (-40 to 122°F) (power derated up to 70°C/158°F)
Storage: -40 to 85°C (-40 to 185°F)
Humidity 0 to 95% RH non-condensing
Elevation: -500 to 3000m (-1640 to 9804ft)
Heat dissipation: <151 BTU per hour
Shelves

Mechanical
19" shelf Dimensions
 
mm: 88.9H x 444W x 279.4D
inches: 3.5H x 17.5W x 11D
Weight: 8.5kg (18.7lb)
Mounting: Fits 19" rack flush mount

23" shelf Dimensions
 
mm: 133H x 533W x 279.4D
inches: 5.25H x 21W x 11D
Weight: 12.7kg (28lb)
Mounting: Fits 23" rack center mount

Note: Consult factory for other 12", 19" and 23" shef configuratins

Connections
 
Input: Dual feed terminal blocks 4 to 6mm2 (12 to 10AWG)
Output: 1/4" studs on 5/8" centers
Chassis ground: 1/4" stud
CAN communication: RJ 12 offset


Standards

The Cordex 250W is designed to meet the following:

Safety:


 
CSA C22.2 No 60950-1-03
UL 60950-1 1st Edition
CE marked
IEC/EN 60950-1
EMC: ETSI 300 386
Emissions:




 

CFR47 (FCC) Part 15 Class B
ICES-03 Class B
EN55022 (CISPR 22) Class B
C-tick (Australia)
EN 61000-3-2
EN 61000-3-3

Immunity:




 

EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6 EN 61000-4-11
ANSI/IEEE C62.41 Cat B3